Easily cut perfect strips for sashing, borders, wide binding, tote
bag handles and more. Lay cut strips across die perpendicular to blades
to cut 3 1/2" squares for cornerstones, 4-Patch and 9-Patch designs. Lay
cut strips across die blades at a 45 degree angle to cut diamonds for
Tumbling Block, 8 Pointed Star and other diamond designs. Die packaging
includes project directions for a GO! Stripe Power throw.
Cuts two 3 1/2" (9 cm) strips, 3" finished.
Use 10" x 24" cutting
mat (55113).
Warranty: AccuQuilt GO! dies are
guaranteed for one year.
Storage: 10" x 24" Die
Board (25 cm x 61 cm)
Organize GO! dies with AccuQuilt GO! Die
Storage Rack (55115).
Care & Maintenance: Use
adhesive lint roller to clean lint and thread from dies. After each
use, with the die pick provided with the cutter, remove any threads
imbedded between blades and foam. It's normal for threads to get caught
where blades meet in a die. Remove with tweezers or die pick. Die blades
never need to be sharpened.
Die Tips:
- With
some fabrics, after cutting, a thread or two will remain where die
blades meet. Snip threads with scissors.
- Use cutting mats that
matches size of each die.
- For best results, cut with die blades
running under roller at an angle. Do not cut with blades parallel to
roller.
- Blades on some dies are positioned at an angle. Align
fabric to edge of shape, not edge of die board.
- Some dies
feature specially designed corners to aid in alignment and pre-cutting.
- For
fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use
good quality fabric to reduce fabric stretch.
- It's always a
good idea to test cut one shape before cutting many shapes to ensure
fabric orientation is correct.
