This die cuts a dragonfly, a bee and a butterfly, all of which are
great for kids' quilts and projects. Before cutting, apply fusible web
to the wrong side of the fabric to get shapes that are ready to fuse and
applique. Use for holiday projects, applique quilts, table favors, gift
tags and more. Die packaging includes project directions for a Critters
to GO! baby bib.
Use with AccuQuilt GO! Fabric
Cuts one each 4 7/8"W x 4"H (12 cm x 10
cm) dragonfly, 4 3/4"W x 4"H (12 cm x 10 cm) bee and
4 7/8"W x 4"H
(12 cm x 10 cm) butterfly. Cut even more with up to six layers of 100%
Use 6" x 12" cutting mat (55112).
AccuQuilt GO! dies are guaranteed for one year.
6" x 12" Die Board (15 cm x 30 cm)
Organize GO! dies with AccuQuilt
GO! Die Storage Rack (55115).
Care & Maintenance:
Use adhesive lint roller to clean lint and thread from dies. After each
use, with the die pick provided with the cutter, remove any threads
imbedded between blades and foam. It's normal for threads to get caught
where blades meet in a die. Remove with tweezers or die pick. Die blades
never need to be sharpened.
some fabrics, after cutting, a thread or two will remain where die
blades meet. Snip threads with scissors.
- Use cutting mats that
match size of each die.
- For best results, cut with die blades
running under roller at an angle. Do not cut with blades parallel to
- Blades on some dies are positioned at an angle. Align
fabric to edge of shape, not edge of die board.
- Some dies
feature specially designed corners to aid in alignment and pre-cutting.
fast applique, apply fusible web to fabrics, then cut shapes with dies.
good quality fabric to reduce fabric stretch.
- It's always a
good idea to test cut one shape before cutting many shapes to ensure
fabric orientation is correct.