Easily cut perfect 2" strips quickly and accurately. The die has cutting
blades that are 23 1/2" long and are open at both ends to allow cutting
of fabric that is still folded as it comes off the bolt. Use the cut
strips for sashing, borders, tote bag handles, log cabin blocks, and
string piecing or lay them across the die perpendicular to cut squares
and at a 45 degree angle to cut diamonds. Die packaging includes project
directions for a Strip Pizzazz quilt.
Use with AccuQuilt GO! Fabric
Cutter (55100).
Cuts four 2"W (5 cm) strips. Cut even
more with up to six layers of 100% cotton fabric.
Use 10" x 24"
cutting mat (55113).
Warranty: AccuQuilt GO! dies
are guaranteed for one year.
Storage: 10" x 24"
Die Board (25 cm x 61 cm)
Organize GO! dies with AccuQuilt GO! Die
Storage Rack (55115).
Care & Maintenance: Use
adhesive lint roller to clean lint and thread from dies. After each
use, with the die pick provided with the cutter, remove any threads
imbedded between blades and foam. It's normal for threads to get caught
where blades meet in a die. Remove with tweezers or die pick. Die blades
never need to be sharpened.
Die Tips:
- With
some fabrics, after cutting, a thread or two will remain where die
blades meet. Snip threads with scissors.
- Use cutting mats that
match size of each die.
- For best results, cut with die blades
running under roller at an angle. Do not cut with blades parallel to
roller.
- Blades on some dies are positioned at an angle. Align
fabric to edge of shape, not edge of die board.
- Some dies
feature specially designed corners to aid in alignment and pre-cutting.
- For
fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use
good quality fabric to reduce fabric stretch.
- It's always a
good idea to test cut one shape before cutting many shapes to ensure
fabric orientation is correct.