This square die is sized to be used on point in combination with the
seven additional AccuQuilt GO! mix and match system dies. Shapes cut
with this die can be featured in the center of Square in a Square and
Flying Triangles quilt block designs. Square-4 3/4" (55019) die can also
be used for background squares for small appliqué blocks, prairie
points, large 4-patch and 9-patch blocks and borders. Die packaging
includes project directions for a Games To GO! Tic-Tac-Toe mini quilt.
Use with AccuQuilt GO! Fabric
Cuts two 4 3/4"W x 4 3/4"H (12 cm x 12
Includes seam allowance.
Use 6" x 12" cutting mat
Warranty: AccuQuilt GO! dies are
guaranteed for one year.
Storage: 6" x 12" Die
Board (15 cm x 30 cm)
Organize GO! dies with AccuQuilt GO! Die
Storage Rack (55115).
Care & Maintenance: Use
adhesive roller to clean lint and thread from dies. After each use,
with the die pick provided with the cutter, remove any threads imbedded
between blades and foam. It's normal for threads to get caught where
blades meet in a die. Remove with tweezers or die pick. Die blades never
need to be sharpened.
some fabrics, after cutting, a thread or two will remain where die
blades meet. Snip threads with scissors.
- Use cutting mats that
matches size of each die.
- For best results, cut with die blades
running under roller at an angle. Do not cut with blades parallel to
- Blades on some dies are positioned at an angle. Align
fabric to edge of shape, not edge of die board.
- Some dies
feature specially designed corners to aid in alignment and pre-cutting.
fast applique, apply fusible web to fabrics, then cut shapes with dies.
good quality fabric to reduce fabric stretch.
- It's always a
good idea to test cut one shape before cutting many shapes to ensure
fabric orientation is correct.