Feathers have long been a favorite motif for quilters. This die cuts
perfect straight and curved feathers that can be used as an applique
design element. Apply fusible web to the wrong side of fabrics and cut
for applique shapes that are ready to fuse and applique. Use for
original or traditional applique designs, flower petals, angel wings,
raindrops and feathered border designs. Die packaging includes project
directions for a Feathers To GO! table runner.
Use with AccuQuilt GO! Fabric
Cuts three 1 3/8"W x 2 7/16"H (3 cm x 6
cm) and three 1 7/16"W x 2 3/4"H (4 cm x 7 cm) feathers.
Use 5" x 10"
cutting mat (55110).
Warranty: AccuQuilt GO!
dies are guaranteed for one year.
Storage: 5" x
10" Die Board (13 cm x 25 cm)
Organize GO! dies with AccuQuilt GO!
Die Storage Rack (55115).
Care & Maintenance:
Use adhesive roller to clean lint and thread from dies. After each use,
with the die pick provided with the cutter, remove any threads imbedded
between blades and foam. It's normal for threads to get caught where
blades meet in a die. Remove with tweezers or die pick. Die blades never
need to be sharpened.
some fabrics, after cutting, a thread or two will remain where die
blades meet. Snip threads with scissors.
- Use cutting mats that
matches size of each die.
- For best results, cut with die blades
running under roller at an angle. Do not cut with blades parallel to
- Blades on some dies are positioned at an angle. Align
fabric to edge of shape, not edge of die board.
- Some dies
feature specially designed corners to aid in alignment and pre-cutting.
fast applique, apply fusible web to fabrics, then cut shapes with dies.
good quality fabric to reduce fabric stretch.
- It's always a
good idea to test cut one shape before cutting many shapes to ensure
fabric orientation is correct.