Squares are the easiest quilt shape to piece. Ideal for beginners and
experienced quilters. This 3 1/2" cut square finishes to a 3" square.
Used in many traditional quilt blocks like Double X, Jewel Box and for
corners of several star blocks. See these and other AccuQuilt GO! mix
and match system block ideas at accuquilt.com. Die packaging includes
project directions for a Squares and Four Patches To GO! quilt.
Cuts two 3 1/2"W x 3 1/2"H (9 cm x 9 cm) squares.
Includes seam
allowance.
Use 5" x 10" cutting mat (55110).
Warranty:
AccuQuilt GO! dies are guaranteed for one year.
Storage:
5" x 10" Die Board (13 cm x 25 cm)
Organize GO! dies with AccuQuilt
GO! Die Storage Rack (55115).
Care & Maintenance:
Use adhesive roller to clean lint and thread from dies. After each use,
with the die pick provided with the cutter, remove any threads imbedded
between blades and foam. It's normal for threads to get caught where
blades meet in a die. Remove with tweezers or die pick. Die blades never
need to be sharpened.
Die Tips:
- With
some fabrics, after cutting, a thread or two will remain where die
blades meet. Snip threads with scissors.
- Use cutting mats that
matches size of each die.
- For best results, cut with die blades
running under roller at an angle. Do not cut with blades parallel to
roller.
- Blades on some dies are positioned at an angle. Align
fabric to edge of shape, not edge of die board.
- Some dies
feature specially designed corners to aid in alignment and pre-cutting.
- For
fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use
good quality fabric to reduce fabric stretch.
- It's always a
good idea to test cut one shape before cutting many shapes to ensure
fabric orientation is correct.