Parallelograms add a great twist to quilt designs. Use for star
points, ribbon twist borders and pieced borders. This parallelogram
shape has been designed to work with the seven additional AccuQuilt GO!
mix and match system dies. A few of the blocks featuring this
parallelogram include Flying Triangles and Wind Blown Square. The die
package includes free project directions for Euro Shams To GO!.
Use with AccuQuilt GO! Fabric
Cutter (55100).
Cuts one 3 3/4"W x 3 1/2"H (10 cm x 9 cm)
parallelogram.
Includes seam allowance.
Use 5" x 10" cutting mat
(55110).
Warranty: AccuQuilt GO! dies are
guaranteed for one year.
Storage: 5" x 10" Die
Board (13 cm x 25 cm)
Organize GO! dies with AccuQuilt GO! Die
Storage Rack (55115).
Care & Maintenance: Use
adhesive roller to clean lint and thread from dies. After each use,
with the die pick provided with the cutter, remove any threads imbedded
between blades and foam. It's normal for threads to get caught where
blades meet in a die. Remove with tweezers or die pick. Die blades never
need to be sharpened.
Die Tips:
- With
some fabrics, after cutting, a thread or two will remain where die
blades meet. Snip threads with scissors.
- Use cutting mats that
matches size of each die.
- For best results, cut with die blades
running under roller at an angle. Do not cut with blades parallel to
roller.
- Blades on some dies are positioned at an angle. Align
fabric to edge of shape, not edge of die board.
- Some dies
feature specially designed corners to aid in alignment and pre-cutting.
- For
fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use
good quality fabric to reduce fabric stretch.
- It's always a
good idea to test cut one shape before cutting many shapes to ensure
fabric orientation is correct.